Conduit, Fittings & Raceways

Halex 1/2 in. Flexible Metal Conduit (FMC) Screw-In Connector Standard Fitting (5-Pack)

The 20440 1/2 in. Flex Screw-In Connector (5-Pack) is designed for indoor use to connect flexible metal conduit (FMC) to various metal enclosures. The connectors feature reversible locknuts that cut through protective coatings on boxes and enclosures to...

Halex 3/4 in. Standard Fitting Metal Conduit (FMC) Screw-In Connector (5-Pack)

These 3/4 in. Flex Screw-in Connectors (5-Pack) are the answer when flexible metal conduit must be joined to steel outlet boxes, load centers and other metal enclosures. They are compatible with standard 3/4 in. knockouts. This connector meets UL and CSA...

RACO 1/2 in. Uninsulated Liquid-Tight 90-Degree Connector, 1-Pack

Halex 1/2 in. Standard Fitting Electrical Metallic Tube (EMT) 1-Hole Straps (4-Pack)

These versatile 1/2 in. 1-Hole EMT Straps (4-Pack) fix EMT to a number of surface types. Zinc-plated for corrosion resistance, these straps can be installed inside or outdoors. Positively snaps onto the conduit.Secures EMT conduit to wood, masonry or a...

Halex #4 ACC Steel Conduit and Pipe Hanger

The #4 Conduit and Pipe Hangers are designed to secure and suspend 1-1/2 in., Rigid conduit to overhead supports. It is made of zinc-plated steel and resists corrosion. Intended for inside or outdoor use.Secure and suspend 1-1/2 in. rigid conduit from...

Halex 3/8 in. Flexible Metal Conduit (FMC) Duplex Connectors (2-Pack)

The 3/8 in. Flexible Duplex Connectors (2-Pack) are designed to connect and bond 2 pieces of flexible metal conduit, AC, MC or NM cable to a steel outlet box or other metal enclosure when only 1 knockout is in use. These connectors include Tri-drive...

Halex 3/4 in. Rigid 1-Hole Conduit Straps (4-Pack)

This 3/4 in. 1-Hole Conduit Straps (4-Pack) are designed for high load bearing and are handy for securing rigid or IMC conduit to a variety of work surfaces. The corrosion-resistant steel snaps onto the conduit to keep it in place. These conduit straps...

Halex 1/2 in. Rigid Conduit Pull Elbow

The 1/2 in. Conduit Pull Elbow has a gasket and removable cover to facilitate wire pulling and maintenance through a sharp bend in a run of threaded rigid or IMC conduit. It is die-cast of corrosion-resistant zinc alloy. This pull elbow meets UL and CSA...

Arlington Industries 1/2 in. Weatherproof Box Holder (Single-Pack)

The Arlington Industries 1/2 in. Weatherproof Box Holder can be used with rigid pipe to suspend electrical boxes or smoke detectors between bar joists and to position electrical enclosures above concrete slabs. This box support is simply screwed into the...

Halex 3/8 in. Flexible Metal Conduit (FMC) Conduit Connector (5-Pack)

The 3/8 in. Conduit Connectors (5-Pack) connect and effectively bond armored cable (Ac) to a steel outlet box or other metal enclosure. They are made of galvanized steel and are designed to ensure ground continuity. This connector meets UL and CSA...

Halex 3/4 in. Standard Fitting Electrical Metallic Tube (EMT) 2-Hole Straps (4-Pack)

When greater load bearing is required, use these 3/4 in. EMT 2-Hole Straps (4-Pack) to secure lengths of EMT conduit to surfaces such as wood or masonry work. Corrosion resistant. This two-hole strap meets UL and CSA requirements.Secures EMT conduit to...

Halex 3/4 in. Rigid 90 Deg. Elbow

Change rigid or IMC conduit direction with the 3/4 in. 90 Rigid Elbow. This galvanized steel elbow features a large radius to allow easy wire pulling. Usable indoors or outdoors. • Enables a 90 directional turn in a run of rigid conduit •...