Conduit, Fittings & Raceways

Halex 2 In. Rigid Offset Conduit Nipple

The 2 in. Offset Conduit Nipple is designed to provide an offset when flexibility is needed to finish off installations using multiple boxes and enclosures. It is made of corrosion-resistant zinc alloy and designed for use with rigid or IMC conduit. This...

Arlington Industries Snap-Tite 3/8 In. Duplex Saddlegrip Connector

The Arlington Industries Snap-Tite 3/8 in. Duplex Saddlegrip Connector is a versatile high-quality electrical fitting that is suitable for indoor use. This connector is designed for use with aluminum and steel, AC and MC flex cables. Die-cast zinc...

Halex 2 In. Rigid 90-Degree Conduit Elbow

The 2 in. 90 Conduit Elbow is intended for use to make a 90 directional change when installing rigid or intermediate metal conduit (IMC) in indoor or outdoor applications. Large radius for easy wire pulling. CSA- and UL Listed.Use to make a 90...

Halex 2 In. Service Entrance (Se) Water-Tight Connector

The 2 in. Watertight Connector is designed to connect SE/SEU cables to metal enclosures. It can also be used to connect UF cable to a waterproof box with a threaded hub. It is die-cast of corrosion-resistant, high-strength zinc alloy and can be used...

Halex 1/2 In. Flexible Metal Conduit (Fmc) Screw-In Connector (5-Pack)

The 20440 1/2 in. Flex Screw-In Connector (5-Pack) is designed for indoor use to connect flexible metal conduit (FMC) to various metal enclosures. The connectors feature reversible locknuts that cut through protective coatings on boxes and enclosures to...

Halex 3/4 In. Flexible Metal Conduit (Fmc) Screw-In Connector (5-Pack)

These 3/4 in. Flex Screw-in Connectors (5-Pack) are the answer when flexible metal conduit must be joined to steel outlet boxes, load centers and other metal enclosures. They are compatible with standard 3/4 in. knockouts. This connector meets UL and CSA...

Raco 1/2 In. 90 Noninsulated Liquidtight Connector

Halex 1/2 In. Electrical Metallic Tube (Emt) 1-Hole Straps (4-Pack)

These versatile 1/2 in. 1-Hole EMT Straps (4-Pack) fix EMT to a number of surface types. Zinc-plated for corrosion resistance, these straps can be installed inside or outdoors. Positively snaps onto the conduit.Secures EMT conduit to wood, masonry or a...

Halex #4 Acc Steel Conduit And Pipe Hanger

The #4 Conduit and Pipe Hangers are designed to secure and suspend 1-1/2 in., Rigid conduit to overhead supports. It is made of zinc-plated steel and resists corrosion. Intended for inside or outdoor use.Secure and suspend 1-1/2 in. rigid conduit from...

Halex 3/8 In. Flexible Metal Conduit (Fmc) Duplex Connectors (2-Pack)

The 3/8 in. Flexible Duplex Connectors (2-Pack) are designed to connect and bond 2 pieces of flexible metal conduit, AC, MC or NM cable to a steel outlet box or other metal enclosure when only 1 knockout is in use. These connectors include Tri-drive...

Halex 3/4 In. Rigid 1-Hole Conduit Straps (4-Pack)

This 3/4 in. 1-Hole Conduit Straps (4-Pack) are designed for high load bearing and are handy for securing rigid or IMC conduit to a variety of work surfaces. The corrosion-resistant steel snaps onto the conduit to keep it in place. These conduit straps...

Halex 1/2 In. Rigid Conduit Pull Elbow

The 1/2 in. Conduit Pull Elbow has a gasket and removable cover to facilitate wire pulling and maintenance through a sharp bend in a run of threaded rigid or IMC conduit. It is die-cast of corrosion-resistant zinc alloy. This pull elbow meets UL and CSA...