Electrical

Halex 2-1/4 in. Service Entrance (SE) Medium-Duty Porcelain Wireholder

Feed wire through the Halex 2-1/4 in. Medium-Duty Porcelain Wire holder in overhead installations. Its zinc-plated lag screw is 2-1/4 in. long. This wire holder can be used inside or outdoors.For use in overhead services to secure incoming service...

Halex 3/4 in. Service Entrance Ell

The 3/4 in. Service Entrance Ell is designed to gain access to the interior of a raceway for wire-pulling, inspections and maintenance. The ell has a removable cover for easy access. This Service Entrance Ell meets UL and CSA requirements.Designed for...

Halex 1-1/2 in. Standard Fitting Service Entrance (SE) Cap

The 1-1/2 in. Service Entrance Cap is designed for use in an overhead service entrance. It mounts on top of EMT, rigid or intermediate metal conduit (IMC) and serves as a connecting point for wiring.Used as a connecting point for overhead service...

Halex 1/2 in. Rigid 2-Hole Conduit Straps (10-Pack)

The 1/2 in. 2-Hole Conduit Straps (10-Pack) are designed to secure rigid or IMC conduit to wood, masonry or similar surfaces. The straps have a high load-bearing capacity and snap onto a conduit to hold it securely in place. Positively snaps on a conduit...

Halex 3/4 in. x 1/2 in. Rigid Reducer Bushing

The 3/4 in. x 1/2 in. Reducer Bushing is intended to reduce the entry size of a run of threaded conduit. The bushing is CSA- and UL listed for use with Rigid or intermediate metal conduit (IMC). Used for indoor applications.Use to reduce the entry size...

Halex 2 in. Service Entrance (SE) Watertight Connector

The 2 in. Watertight Connector is designed to connect SE/SEU cables to metal enclosures. It can also be used to connect UF cable to a waterproof box with a threaded hub. It is die-cast of corrosion-resistant, high-strength zinc alloy and can be used...

Square D Homeline Load Center Main Breaker Retaining Kit

This Homeline Circuit Breaker Retaining Kit retains a back-fed breaker when used to secure a circuit breaker to the interior of a load center. It is designed for use with HOM48L125GC, GRB and HOM612L100F/S, RB load centers. This retaining kit features a...

Halex 1-1/4 in. Standard Fitting Rigid Insulated Metallic Grounding Bushing

The 1-1/4 in. Rigid or IMC Insulated Metallic Grounding Bushing is a vital safety fitting for your run of conduit. Use this zinc alloy bushing with a locknut indoors only. This grounding bushing meets UL and CSA requirements.Grounds threaded rigid or IMC...

Halex 3/8 in. Flexible Metal Conduit (FMC) Saddle Connectors (5-Pack)

The 3/8 in. Saddle Connectors (5-Pack) are designed to connect non-metallic sheathed cable, flexible metal conduit and metal-clad and armored cables to steel electrical enclosures. They are made of zinc alloy and zinc-plated steel and are suitable for...

Cooper Bussmann FRN Series 20 Amp Brass Time-Delay Cartridge Fuses (2-Pack)

Halex 1/2 in. Rigid 90 Deg. Conduit Elbow

Add the 1/2 in. 90 Rigid or IMC Conduit Elbow for a right-angle turn in a run of conduit. This galvanized elbow has large radii, which help with wire pulling. The elbow meets UL and CSA requirements. • Allows for a 90 change of direction in a run...

Square D 36 kA Single Phase Panel Mounted Type 1 Surge Protective Device - Box Packaging

The Square D by Schneider Electric SDSA1175 is a hardwired Type 1 Surge Protective Device is NEMA 4X rated and is suitable for both indoor and outdoor applications. This SPD is rated at 36,000 Amp Maximum Surge Current Rating and has a intended for use...