Electrical

Cooper Bussmann 40 Amp Brass Cartridge Fuses (2-Pack)

Halex 1/2 in. Liquid-Tight Connector

Connect liquid-tight conduit to an electrical enclosure, such as a weatherproof outlet box. The die-cast zinc alloy construction gives it corrosion resistance for both indoor and outdoor use. This connector meets UL and CSA requirements.Connects liquid...

Halex 3/4 in. Rigid Insulated Rigid Grounding Bushing (2-Pack)

Safely ground a run of conduit with 3/4 in. Insulated Rigid or IMC Grounding Bushings (2-Pack). These zinc alloy bushings feature a thermoplastic liner.Grounds rigid or IMC conduitDie-cast of high-strength zinc alloyUL and CSA ListedThermoplastic liner...

Halex 1/2 in. Rigid Chase Conduit Nipple (2-Pack)

To connect threaded rigid or intermediate metal conduit (IMC) to holes in metal boxes or enclosures, use the 1/2 in. Chase Conduit Nipples (2-Pack). The nipples can also be used along with locknuts to create short raceways between boxes or enclosures...

Square D Homeline 100 Amp 16-Space 24-Circuit Outdoor Ring-Type Overhead/Underground Surface Mount Main Breaker CSED

The Square D 100 Amp 16-Space 24-Circuit Outdoor Combination meter Socket and Main Breaker Load Center is suitable for use as a combination service entrance prodice (CSED). This unit is ANSI certified and UL listed with a maximum 10,000 AIR. The...

Cooper Bussmann 50 Amp Brass Cartridge Fuses (2-Pack)

Gardner Bender 1/2 in. Metal Staple 2 Cond #10 #12 and #14 NM (500-Pack)

GB's standard and most popular staple used to secure NM (non-metallic) cable. At 1/2 in. wide and 1-1/8 in. long these staples are recommended for 14/2, 12/2 and 10/2 NM, or other types of NM cables. GB's 1/2 in. metal staples are preferred in the...

Halex 1 in. 1-Hole Standard Fitting Electrical Metallic Tube (EMT) Straps (4-Pack)

Rely on 1 in. EMT 1-Hole Straps (4-Pack) for assurance that EMT conduit is safely installed. These zinc-plated straps snap on and help with load bearing. Positively snaps onto the conduit.Secures EMT conduit to wood, masonry or a similar surface where...

Halex 1-1/2 in. Rigid 2-Hole Conduit Straps (2-Pack)

Depend on 1-1/2 in. Rigid or IMC 2-Hole Conduit Straps (2-Pack) to help fix conduit to wood or masonry. Zinc-plated to resist corrosion, they are for indoor and outdoor use. Positively snaps onto the conduit. • Secures rigid or IMC conduit to wood,...

Halex 1 in. Rigid 90-Degree Steel Conduit Elbow

The 1 in. 90 Steel Conduit Elbow facilitates a 90 change of direction in a run of rigid or intermediate metal conduit (IMC). It features large radii to help with wire pulling. Large radii for easier wire pulling.Allows for a 90 change of direction in a...

Arlington Industries Snap-Tite 3/8 in. Saddlegrip Connector (50-Pack)

Saddlegrip SNAP-TITE connector used with aluminum and steel Flex, AC and AC90 cable. May also be used with MCI and MCI-A cable. It is Zinc die-cast.Provided with insulated throatConcrete tight when tapedSNAP-TITE products have been tested and listed by...

Halex 3/4 in. Non-Metallic (NM) Clamp Connectors (50-Pack)

These Halex 3/4 in. Non-Metallic Clamp Connectors (50-Pack) connect non-metallic sheathed cables and flexible cord to steel outlet boxes and other metal enclosures. They feature Tri-Drive screw heads which are compatible with Phillips, slotted and square...