Kidde 10 Year Worry-Free Hardwired Combination Smoke And Carbon Monoxide Detector With Wire-Free Voice Interconnect

Product Description

This Kidde 120-Volt Hardwired Combination Smoke/CO Voice Alarm with Intelligent Wire-Free Interconnect and 10-Year Battery features voice alert, wireless interconnectivity, and a sealed-in 10-Year Backup Battery. This alarm requires hardwire installation and includes a 10-year Battery Backup to provide protection even during power outages. The voice alarm announces the type of hazard detected and indicates when the Smart Hush feature has been activated. This alarm interconnects with other Kidde hardwire interconnect alarms and also features wire-free interconnectivity with other Kidde 10-Year Wire-Free Interconnect alarms. If one unit is triggered, all interconnected alarms will sound. Wire-free interconnectivity allows for easy interconnect setup and eliminates the need for expensive rewiring.Smoke and carbon monoxide detector requires hardwire installationAlarm features wire-free interconnectivity via radio frequencyInterconnect with existing Kidde hardwire interconnectable unitsAlarm can also interconnect with other Kidde 10-year Wire-Free Interconnect units via radio frequency, providing an interconnected system without the inconvenience of rewiring your homeWire-free interconnectivity with the following Kidde models: P4010ACSCO-W, P4010ACS-W, P4010DCSCO-W, P4010DCS-W, P4010DCS-W, P4010LACS-W, P4010LDCS-WVoice alarm announces in.Firein., when a smoke or fire hazard is detected and announces in.Warning Carbon Monoxidein. when a CO hazard is detectedInternal timer reminds you to replace your unit after 10 years to ensure the most reliable protectionPhotoelectric sensing alarms may detect visible fire particles (associated with slow smoldering fires) sooner than ionization alarmsCompatible with the Kidde SmartBridge app and hub (sold separately), so that you can receive a message on your smart phone, tablet, or PC alerting you to a potential threatSmartBridge app and hub are not required for prodice to operateInterconnect is not required; this alarm also functions as a stand-alone Smoke and Carbon Monoxide detectorA maximum of 24 Kidde prodices can be interconnected in a multiple station arrangement; the interconnect system must not exceed the NFPA (National Fire Protection Association) limit of 18 initiation prodices, of which 12 can be smoke alarms; with 18 initiating prodices (smoke, heat, CO, etc. ) interconnected, it is still possible to interconnect 6 strobe lights and/or relay modules10-year limited warrantyCheck with your state and local fire and building/safety codes for specific information regarding smoke & carbon monoxide alarmsSmoke and carbon monoxide detector utilizes a photoelectric sensor to detect fire hazards and sounds an 85 db alarm when a hazard is detectedUL/CSFM Ref. Kidde Part P4010ACSCO-W