Roberts 2001 4 Gal. Felt-Backed Sheet Vinyl Flooring Adhesive

Product Description

ROBERTS 2001 is a superior, commercial-grade, felt-backed sheet vinyl adhesive. This adhesive was prodeloped with the optimum open time and working time for the positioning of felt-backed sheet vinyl flooring. This adhesive is for residential and moderate commercial traffic and has a lifetime non-staining warranty.

- For adhering mineral fibrous felt-backed sheet vinyl

- Bonds with concrete, APA rated plywood, vinyl composition tile (free of wax), non-cushioned felt-backed sheet vinyl (free of wax and embossing leveler), primed gypcrete (ASTM F2419) and terrazzo

- For interior installation only

- Moisture Control Adhesive - up to 5 lbs. MVER and 80% RH

- Up to 25 minutes open time and 24 to 48 hour curing time

- Approximately 160 to 180 sq. ft. per gallon coverage when applied with a 1/16 in. x 1/16 in. x 3/32 in. U-notch trowel and 170 to 190 sq. ft. per gallon coverage when applied with a 1/16 in. x 1/16 in. x 1/16 in. square notch trowel

- Approximately 220 to 240 sq. ft. per gallon coverage when applied with a 1/16 in. x 1/32 in. x 1/32 in. U-notch trowel

- Enviro-friendly, solvent-free and LEED compliant; VOC 1 g/L, SCAQMD Rule 1168

- Protected by GoldGuard, an antimicrobial protection system that inhibits the growth of mold, mildew and odor causing bacteria in both wet and dry adhesives

- CRI Green Label Plus Certified - GLP no. 36471

- Non-flammable for safe use

- 10 year direct bond, lifetime non-staining limited warranty

- High temperature and low humidity will cause the adhesive to cure faster while premature traffic can cause installation failure

- Do not use this adhesive for pure/luxury vinyl or vinyl-backed products