MEC High Pressure Adjustable Regulator with Tee Handle, 3/4 in. FNPT, 35-100 psi, Preset to 50 psi

Product Description

The MEGR-164 Series adjustable high-pressure regulators offer a wide selection of available pressure ranges. High pressure regulators are typically used to reduce tank pressure to an intermediate pressure for use by another regulator. They may be used as high pressure regulators on distribution systems when used in conjunction with first-stage downstream regulators. When equipped with an integral relief valve (MEGR-164SR Series), the regulator may be used as a final-stage regulator on high pressure systems. It may also be used as a first-stage regulator when set at 10 psig (0,69 bar) or less. The 1/4 in. FNPT tapped side outlet can be used to install a pressure gauge or a hydrostatic relief valve. This series contains brass materials that are not compatible with anhydrous ammonia service.|Outlet pressure setting: 50 psig / adjustment range 35-100|Exterior finish: gray urethane|Max. inlet pressure: 250 psi|Operating temperature range: -40 degree F to 200 degree F