MEC | sku: 108458 MEC Relief Valve 1/4 in. MPT Economy Hydrostatic - 440 psi Log in for pricing Compare
Marshall Excelsior | sku: 108459 MARSHALL EXCELSIOR COMPANY MEC PROTECTIVE CAP .437 IN. ID X .38 IN. OAL YELLOW * Log in for pricing Compare
MEC | sku: 108461 MEC Test Block 3/4 in. FPT with 0-60 psi Gauge and Valve Stem Log in for pricing Compare
MEC | sku: 108463 MEC ASME/DOT Service Valve, 3/4 in. MNPT x F.POL, Without Diptube Log in for pricing Compare
MEC | sku: 108465 MEC Service Valve 3/4 in. MNPT x F.Pol with 11.7 in. Diptube and Bleeder, No Relief Valve Log in for pricing Compare
MEC | sku: 108466 MEC Service Valve Motor Fuel 3/4 in. MNPT x 3/8 in. MNPT with 2.6 GPM Log in for pricing Compare
MEC | sku: 108454 MEC 1-1/4 in. Acme Forklift Gasket 1-1/4 in. Acme Gasket. For leak free seal. Durable nitrile rubber material.Depth: 0.145ID: 0.665OD: 0.925Material: Duro Nitrile / BunaAcme gasketColor: black Log in for pricing
MEC | sku: 108455 MEC 3-1/4 in. Acme Gasket 1/4 in. Turn Chrome Plated Lead Free Supply Stop. Available in straight and angle configurations with a combination of IPS, sweat and compression connections. One-piece machined brass construction which is suitable for use in both hot and cold water... Log in for pricing
MEC | sku: 108456 MEC Forklift Connector Interior Male O-Ring Forklift tank valve replacement O-ring. Color is black. UL Listed compound for use with propane.I.D. 0.6120.818 in. O.D.Material: nitrile/BunaReplacement part Log in for pricing
MEC | sku: 108458 MEC Relief Valve 1/4 in. MPT Economy Hydrostatic - 440 psi Designed to protect piping and shutoff valves from over pressure situations where liquid LP-Gas or NH3 has the potential to be trapped. These relief valves provide pressure relief at or in excess of the stated pressure setting. Protecting against line or... Log in for pricing
Marshall Excelsior | sku: 108459 MARSHALL EXCELSIOR COMPANY MEC PROTECTIVE CAP .437 IN. ID X .38 IN. OAL YELLOW * Protective Cap For MEH225 Relief Valve*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES Log in for pricing
MEC | sku: 108460 MEC 1.75 in. I.D Protective Cap These protective caps are made of durable, fade resistant vinyl. All relief valves must have a protective cap to keep debris and water out of the valve. Does not include lanyard.Cap ID - 1.75 in.Cap height: 1 in.Color: yellowUniversal Log in for pricing
MEC | sku: 108461 MEC Test Block 3/4 in. FPT with 0-60 psi Gauge and Valve Stem This test block is designed to test low pressure lines for system leaks. The factory installed check valve allows the line to be pressurized and adjusted to the desired test pressure. Low Pressure.Inlet: 3/4 in. FNPTPSIG: 0-60Includes gaugeSafety/test... Log in for pricing
MEC | sku: 108462 MEC 1-3/4 in. M.Acme x 3/4 in. MPT Adapter Asssembly 1-3/4 in. M.Acme x 3/4 in. MNPT Brass ACME Adapter. The part from Marshall Excelsior is an ACME adapter. One end of the adapter is a male 1 Male ACME which is the same type of connection you find on a fill valve and the other end of the fitting is 3/4 in... Log in for pricing
MEC | sku: 108463 MEC ASME/DOT Service Valve, 3/4 in. MNPT x F.POL, Without Diptube This ASME/DOT Container service valve is intended for use in vapor withdrawal service for ASME and DOT containers or as fuel line shutoff valves. 3/4 MNPT x F.Pol ASME/ Dot Service Valve (No Dip Tube). Note: These valves do not incorporate an integral... Log in for pricing
MEC | sku: 108465 MEC Service Valve 3/4 in. MNPT x F.Pol with 11.7 in. Diptube and Bleeder, No Relief Valve Intended for use in vapor withdrawal service for ASME and DOT containers or as fuel line shutoff valves. Note: These valves do not incorporate an integral pressure relief valve and are intended for use in containers that have a separate stand alone... Log in for pricing
MEC | sku: 108466 MEC Service Valve Motor Fuel 3/4 in. MNPT x 3/8 in. MNPT with 2.6 GPM Intended for vapor or liquid withdrawal service on DOT forklift or engine fuel containers. Two closing ow rates are offered - 1.5 GPM for medium to light duty vehicles and 2.6 GPM for those with greater fuel demands. Note: These valves do not incorporate... Log in for pricing
MEC | sku: 108469 MEC Service Valve Handle, 1.592 in. O.D. Zinc Replacement Motor Fuel Service Valve Handwheel. Universal design. Manufactured in an ISO Accredited Facility.Type: hand wheel onlyReplacement part1.592 in. O.D.Material: zincCertified to ANSI / NSF standard 61-9 annex Gfits 3/4in. MEC service valve Log in for pricing