Roberts 4 Gal. Vinyl Composition Tile Floor Adhesive

Product Description

ROBERTS 2057 Vinyl Composition Tile (VCT) Adhesive is a clear, solvent-free, water-based, thin-spread adhesive that provides excellent grab and high residual tack. This superior grade adhesive brushes, rolls or trowels on and helps hold tiles firmly in place, even when subjected to repeated cleaning and mopping. When spread thinly as instructed, the adhesive dries correctly and turns clear, allowing chalk lines to remain visible. This adhesive is also suitable for installing vinyl-composition or vinyl-asphalt tile over existing vinyl-composition or vinyl-asphalt subfloors that are free from waxes, sealers and finishes.For adhering vinyl composition tile (excluding self-stick), including tile-over-tile installationBonds with concrete, APA rated plywood, one layer of existing and finish free VCT, aged cutback adhesive residue, primed gypcrete (refer to ASTM F2419) and terrazzoIdeal for direct bond and double bond installationMoisture Control Adhesive - up to 8 lbs. MVER and 85% RHThin-spread adhesive dries clear in up to 24 hours with the restriction of foot traffic and moving heavy objectsApproximately 160 to 180 sq. ft. per gallon coverage when applied with a 1/16 in. x 1/16 in. x 3/32 in. U-notch trowel and 170 to 190 sq. ft. per gallon coverage when applied with a 1/16 in. x 1/16 in. x 1/16 in. square-notch trowelEnviro-friendly, solvent-free and LEED compliant; VOC lt/ 1 g/L, SCAQMD Rule 1168Protected by GoldGuard, an antimicrobial protection system that inhibits the growth of mold, mildew and odor causing bacteria in both wet and dry adhesivesCRI Green Label Plus Certified - GLP no. 364715 year moisture control, 15 year direct bond, 7 year double bond limited warrantyDo not expose freshly applied adhesive to water for 4 days or to standing water for 4 weeks