Edge Pro Tile Kits: FAQ
Each Pro Kit is a complete tile shower kit, containing enough tile panels to complete a typical application:
Backsplash Pro Kit: 5 panels or 30 sq. ft.
Shower Surround Pro Kit: 12 panels or 84 sq. ft.
Tub Surround Pro Kit: 9 panels or 64 sq. ft.
Our tiles are engineered from PVC (Polyvinyl Chloride) sheets and finished with a proprietary coating to mimic the look and feel of ceramic tile.
This product is a tile alternative engineered to simplify the renovation process with tile shower kits save installers time. Instead of placing individual tiles, installers adhere the bathroom tile sheets, or panels, to the wall with basic construction adhesive. The panels are pre-cut with the desired tile pattern, guaranteeing perfectly installed patterns.
No, once installed, even the best installers can’t tell the difference between our tiles and ceramic tile.
Yes, our tile shower kits are engineered from PVC, which will not absorb water. Check out our watertight seam in our Shower & Tub Surround line to learn more.
This product is designed for contractors, but is easily installed by anyone at any skill level.
Our Backsplash Pro Kit can be installed over any flat and clean surface, including existing tile.
You can use any non-sanded or un-sanded grout available on the market. CAUTION: Sanded grout may dull the surface.
Backsplash panels are ¼” thick, similar to ceramic tile.
You can use any edging, just be sure to account for the thickness of any existing tile if not installing on a fresh surface. We do not manufacture beveled edges and does not include edging in the kit.
Panels can be cut with a utility knife (score and snap), oscillating tool, circular saw or a table saw.
Yes, we meet the industry standard for backsplash heat resistance and fire rating. As with all range tops, the heat source should be at least 6” away from the backsplash. You can view the product specifications in this document.
The following are recommended adhesives:
Loctite® Power Grab® Heavy Duty Construction Adhesive
Mapei Type-1 White Adhesive and TEC Type 1 Mastic
Manus-Bond 75-AM Industrial adhesive
*Adhesive is not included in the kit.
Typically you will need: Tape measure, utility knife circular saw, oscillating saw, drill, level, construction adhesive, tile spacers and an unsanded or non-sanded grout.
Our tile shower kits are fast and easy to install with no special skills required. You can download our written instructions here.
This product is built for contractors, but is designed to be easily installed by anyone at any skill level.
You can place the bathroom tile sheets over any flat and clean surface, including existing tile. You do not need cement board or equivalent as a substrate.
Yes, our Tub Surround Kit was designed with a patent-pending sealing process. The interlocking joint between stacked tile sheets, when properly glued, creates a water-tight seal.
You can use any non-sanded or un-sanded grout available on the market. CAUTION: Sanded grout may dull the surface.
Panels are ¼” thick, similar to ceramic tile.
You can use any edging, just be sure to account for the thickness of any existing tile if not installing on a fresh surface. We do not manufacture beveled edges and does not include edging in the kit.
Tile panels can be cut with a utility knife (score and snap), oscillating tool, circular saw or a table saw.
Yes, you install any accessory in the same manner as ceramic tile by drilling through the product. Be sure to support doors with the proper framing.
The following are recommended adhesives:
- Loctite® Power Grab® Heavy Duty Construction Adhesive
- Mapei Type-1 White Adhesive and TEC Type 1 Mastic
- Manus-Bond 75-AM Industrial adhesive
Typically you will need: Tape measure, utility knife circular saw, oscillating saw, drill, level, construction adhesive, tile spacers and an unsanded or non-sanded grout.
Tile shower kits should be wiped clean with a clean damp cloth or non-abrasive sponge. Do not use the scrubber side of dual-action sponges as this will scratch and mar the tile surface. Do not use wax-based or oil-based cleaners to bring out the shine because the chemicals in those products can harm the surface over time. We recommend using denatured alcohol to bring out the original shine of the tile.
These products score well in hardness rating and chip resistance. See our product specification documents for specific results.
Not a problem, watch this video on how to replace a damaged tile. It's quick and easy and anyone can perform the repair.
No, currently our products are only approved for vertical applications.
No, currently our products are only approved for indoor use.